All the news of Cromauto

CROMAUTO Presents Two Revolutionary Innovations in the Automotive Refinishing World

CROMAUTO, renowned for its constant innovation in the automotive sector, introduces two groundbreaking products: the DIAMOND 4400 UHS SUPREME Clearcoat and the High-Build UHS Primer.

The DIAMOND 4400 UHS SUPREME Clearcoat offers unparalleled efficiency by allowing vehicle manipulation and polishing just 60 minutes after application, without the need for booth heat. This not only reduces energy costs in the workshop but also ensures consistent performance in various weather conditions.

On the other hand, the High-Build UHS Primer redefines quality standards in automotive refinishing with its exceptional filling power and fast drying time, allowing sanding in less than 1 hour in open air without booth heat. With a wide range of colors and customization capability with a variety of UHS catalysts to suit your drying needs, this primer provides a solid and durable base for refinishing work, ensuring professional and long-lasting results.

Both products stand out for their ease of application, versatility, and ability to enhance workshop productivity without sacrificing the quality of the final finish. With these innovations, CROMAUTO continues its commitment to offering advanced solutions that drive efficiency and excellence in every repair.

Upgrade your refinishing processes and discover the power of cutting-edge technology with CROMAUTO's new products. Raise your standards and ensure superior results in every refinishing job.

Our General Manager Félix Moreno García, and Technical Manager, Ismael Salqueiro, have presented CROMAUTO's new products at CESVIMAP aimed at increasing productivity, efficiency, and sustainability in painting processes.

During a theoretical-practical session, the two main innovations from CROMAUTO designed to improve both basecoat and finishing works were reviewed.

These are products that are easy to apply, reducing drying times. They improve curing and hardening times compared to other varnishes from the brand.

In the practical workshop part, various pieces and colors were tested with the Filler UHS 445 (medium gray) and different mixtures of the 4400 UHS SUPREME clearcoat, along with their catalysts and thinners.

FILLER UHS 440/445/449 HIGH BUILD This new UHS primer in gray scale complies with European VOC regulations. It is intended for repainting automobiles, motorcycles, and industrial vehicles.

Key features • High filling capacity • Air drying speed (40 min at 20°C) • Easy and quick sanding • Optimal adhesion (aluminum, steel, galvanized steel, and electro-galvanized) • Adhesion on some plastics (PP-EPDM, GRP, ABS) • 5:1 mixture with 4 possible catalysts

DIAMOND 4400 UHS SUPREME Clearcoat This innovative 2K UHS acrylic clearcoat has been designed for use in repainting with two-coat, waterborne, and solvent systems. It is specially formulated for both partial repairs and complete vehicle painting, with easy application.

Key properties • Quick hardening • Great polishing capability • High productivity Air drying (20°C) in 1 hour • Heat drying 10 min at 60°C • High UV protection

Only 3 days left until the Tour de France 2023 passes through our city, Vitoria-Gasteiz. The second stage of the Tour de France starts in Vitoria, the headquarters of CROMAUTO. We warmly welcome the Tour de France 2023 to our city.

In celebration of this grand event, our city is hosting various activities, one of which is decorating the city with bicycles painted in the colors of the Tour. CROMAUTO has collaborated with the ADSIS Foundation to make our city look stunning. We have worked together with them, using our CROMAUTO paints such as CROMACRYLPRO and CROMAQUAPRO. Their talented students have put in their utmost effort to paint these bicycles in a timely manner, so they can be displayed throughout the city.

We would like to express our gratitude to all the members of the ADSIS Foundation and the City Council for this beautiful gesture towards cycling enthusiasts and the Tour de France 2023. The city is adorned with the colors of the Tour throughout its streets.

With the purchase of two cutting-edge varnishes from the DIAMOND 4100 UHS and DIAMOND 4500 UHS EXPRESS range, you can choose two units of the same varnish or both at once and receive THIS FANTASTIC GIFT. We want you to enjoy the summer with us, and what better way than by enjoying good music to thank you for your loyalty to CROMAUTO.

The promotion will be valid until June 30, 2023, or while supplies last.

Request this PROMOTION from our CROMAUTO distributors.

Here are the varnishes included in this promotion:

DIAMOND 4100 UHS:

It stands out for its versatile application, delivering excellent final results under all conditions. Developed for partial repairs, touch-ups, or full coatings. Allows for time and cost optimization in extreme conditions (low temperatures). Provides excellent performance for both oven drying and air drying. Offers excellent vertical stability, intense gloss (mirror effect), exceptional hardening, and extraordinary durability. Easy and straightforward application, with a flash-off time between coats of 5-10 minutes. This product reduces varnish consumption by 30% and increases productivity. Allows drying in 15 minutes at 60 degrees Celsius (CRH 45-CRH43) or 20 minutes at 60 degrees Celsius (CRH41). Can be polished after 90 minutes from application. Mixing ratio of 2:1, with hardeners CRH 45 EXPRESS, CRH43 FAST, CRH41 STANDARD, CRH 40 SLOW. The innovation of this varnish allows us to optimize workflow and minimize the common problem in workshops known as bottleneck. Works with three hardeners: CRH 40 / CRH 41 / CRH 43 / CRH 45.

DIAMOND 4500 UHS EXPRESS:

2K UHS varnish specially formulated for partial repairs. Can be used on water-based or solvent-based bases interchangeably. Provides high gloss and fast drying (40 minutes from varnish application). Can be polished within 1 hour. Saves a significant amount of energy in the painting cycle. Increases productivity. Dries in a booth in cycles of 10 minutes at 60 degrees Celsius, 20 minutes at 40 degrees Celsius, and 40 minutes at 20 degrees Celsius in open air. In IR, drying would take 5 minutes. Stands out for its high hardness, scratch resistance, and UV resistance. Hardeners: CRH 45.

CROMAUTO will be present this year at the Motortec 2022 Fair in Madrid. It will take place between April 20 and 23 at the Ifema fairgrounds.

We will be delighted to receive your visits at our stand 9C 41 located in Hall 9.

Centro Zaragoza has granted product certification to CROMAUTO's finishing paint system, made up of its CROMAQUA PRO base coat line, and two varnishes, DIAMOND 4100 UHS and DIAMOND 4500 UHS EXPRESS.

This certification is based on a series of trials and tests whose objective is to verify the good behavior and quality of these systems, reaching the level of confidence necessary for their acceptance as a certified finishing system for use in car refinishing.

To obtain Centro Zaragoza certification as a finishing system, a series of tests have been carried out on the complete painting system, both on metallic substrates and flexible plastics. These tests are based on UNE-EN ISO standards, of vehicle manufacturers, as well as those of Centro Zaragoza, to verify both their technical qualities and durability, as well as the optical properties of coverage and color adjustment.

Centro Zaragoza's certification is based, in collaboration with different accredited external laboratories, on the evaluation and technical validation of the analyzed products, achieving a satisfactory result in all the tests carried out.

From Centro Zaragoza we congratulate CROMAUTO for having achieved this certification, which demonstrates its commitment to the quality of its products.

A NEW ADDITIVE TO OPTIMIZE THE REPAIR IN CONDITIONS OF VERY LOW TEMPERATURE AND HIGH HUMIDITY.

CROMAUTO has developed AVC 612 FAST DRY ADDITIVE, a new and innovative product for application and drying processes of CROMAQUA PRO, for conditions of very low temperatures and high humidity.

The use of this new product allows the workshop professional to reduce drying times, in addition to achieving a correct hardening of the color bases in extreme environments, thus increasing productivity and profitability. It is also used to avoid the appearance of tape marks during the banding processes.

The workshop professional must use a maximum percentage of 10% of the AVC 612 additive on the final color mixture, and then proceed with the dilution and application of the product following the steps in the technical data sheet.

AVC 612 FAST DRY ADDITIVE, available within the CROMAQUA PRO series in a 500 ml container.

CROMAQUA PRO

CROMAQUA PRO unifies everything that the workshop demands of us:

· Excellent covering.

· The matching of solid, metallic and pearl colors is guaranteed with specific tools such as the X-RITE spectrophotometer and the new color chart. Both form the PREMIUMCOLORS system.

· Wide application possibilities. The system has a specific range of products to adapt to different climatic conditions.

· Total control of the metallic particle due to the perfect choice of pigments.

· Ease of sanding. Paint defects can be removed.

· Fabulous aesthetic appearance.

· Great verticality.

· Ideal in blurring processes.

From Cromauto we want to present our new technological advance, our new basic designed and directed to facilitate the reproduction of three-layer colors, such as the Soul Crystal Red 46V and Soul Red 41V from MAZDA or the Europe Ruby Red from Ford, etc ...

The development of this new basic provides greater depth and color matching in these complex three-coat colors, a Solvent Bilayer system with greater application agility, it will not be necessary to use an intermediate coloring layer as occurs in other systems on the market, translating into a considerable reduction in total repair time.

With this basic and thanks to its evolution we achieve:
• Simplify and lighten the repair of complex colors by being integrated within the CROMACRYL PRO.
• We save repair time and increase productivity and profitability.
• We reduce the costs and material used by more than half compared to other competitors.
• We provide optimal depth, light and color matching.
• Easier to blur.
• Perfect strength and resistance to sunlight and bad weather.

The long-awaited day like BLACK FRIDAY arrives, and CROMAUTO does not want to miss the opportunity to offer you an exclusive promotion for this day. Request information from your nearest official Cromauto dealer.

By purchasing a box (4 units of 5L./box) of Varnishes Cromauto DIAMOND 4000 UHS, 4100 UHS and 4500 UHS EXPRESS with their respective catalysts, you can take a BLUETOOTH Speaker with Karaoke function (microphone and remote included).

Diamond 4100 UHS Clearcoat, Filler 232 UHS Rapid and Filler 200 HS Fast
Cromauto has a range of products for car repainting that consists of putties, fillers, clearcoats, water-based basecoats line: Cromaqua Pro and solvent basecoat: Cromacryl, products for plastics, sprays, catalysts and solvents.

The current trend in products for car repainting is to reduce drying times for a decrease in the total times of work processes. For this reason, Cromauto has developed new products that are characterized by shorter drying times or the possibility of drying in air or at a lower temperature, which achieve energy savings.

With this objective, Cromauto has included in its range the new products that it presented at Centro Zaragoza, of which a theoretical presentation was made followed by a series of practical applications in the workshop.

Diamond 4100 UHS Clearcoat
Designed for high-quality finishes in two-layer finishing systems, it is a UHS acrylic clearcoat characterized by a high-gloss finish and high chemical resistance. The Diamond 4100 UHS is a versatile clearcoat thanks to its 3 catalysts: CRH 41 Medium, CRH 43 Fast and CRH 45 Extra Fast, which allow it to be adapted to the different needs of the workshop, and can be applied both for partial or touch-up painting as well as for painting complete vehicle.
Its mixing ratio is 2:1 by volume, and between 0 and 5% of diluent can be added: CRS 350 Medium, CRS 370 Slow or CRS 390 Extra slow.

Filler 232 UHS RapidThis is a medium gray UHS acrylic rig designed for quick or express repairs. It provides quick drying in partial repairs, superficial or small dents, without the need to apply heat or use IR equipment, thanks to its air drying that accelerates with the humidity of the environment, which means energy savings for the workshop.

Its mixing ratio with its specific fast CRH 32 catalyst is 2:1 by volume (3:1 by weight) and without the addition of diluent. Its mixing life is 30 minutes.

The application of the Filler 232 UHS Rapid consists of a first half coat of anchor followed by two full coats with 5 minutes of evaporation between coats, obtaining thicknesses of 70-130 microns.

The great advantage of this rig is its drying, which with just 25-40 minutes of air drying can be sanded, without the need for cabin drying at 60ºC or drying with IR equipment.

Filler Fast Serie 200
HS acrylic filler designed to achieve faster and more efficient repairs (drying at low temperatures) with reduced drying times and good sanding qualities. It is available in three shades, with the following references:
200 Fast white, 205 Fast gray and 209 Fast black.

Its mixing ratio is 4:1 by volume, with the CRH 15 Slow and CRH 20 Medium catalysts, plus 10-15% diluent. As a recommendation, when the temperature is above 30ºC, the CRH 15 Lento catalyst should be used with the CRS 390 Extra Slow diluent.

The application of the Filler Fast Series 200 rig consists of a first half coat of anchor followed by two complete coats with 5-10 minutes of evaporation between coats and 10 minutes before drying at 60ºC or 5-10 minutes before IR drying.

As for its drying, the Fast Series 200 rig dries in 20-30 minutes at 60ºC, depending on the catalyst used, and in 10-12 minutes with the IR equipment.

Other products and tools

In addition to the presentation and testing in the workshop of these three products, Cromauto presented us with its Premiumcolors color management system, which includes the spectrophotometer, the color program and the color charts, with the new Cromaqua Pro water base line that was incorporated in early 2018.

During the practical applications of the varnish and the coatings, it was possible to test the application of the Cromaqua Pro bilayer base, which stands out for its covering and finishing capacity. It was also possible to know the operation of the color program, which allows the management of the paint job, together with the information provided by the spectrophotometer for the correct selection of the color formula.

Article published by Technical Magazine of Centro Zaragoza No. 84 - April / June 2020

revistacentrozaragoza.com

Cromauto presents a new UHS acrylic clearcoat for high quality finishes, in solvent or water basecoat processes. The new DIAMOND 4100 UHS.

• It stands out for its flexibility of application allowing good final results in all conditions, developed for partial, touch-up or global repairs.
• It allows optimizing process times / costs in extreme conditions (low temperatures).
• It obtains good performance both oven dried and air dried.
• It presents excellent vertical stability and great intense brightness (mirror effect), excellent hardening and extraordinary durability.
• Easy and simple application, half hand and full hand, with evaporation interval between 5-10 minutes.
• The performance of this product reduces 30% of varnish consumption and increases productivity.
• It allows drying in 15 minutes 60 degrees, (CRH 45-CRH43) or 20 minutes 60 degrees (CRH41).
• We can polish after 90 minutes from its application.
• Mixing ratio 2: 1, catalysts CRH 45 EXPRESS, CRH43 RAPID, CRH41 STANDARD.
• The innovation of this varnish allows us to optimize the workflow and minimize the usual problem of workshops, called a bottleneck.
  

From March 13 to 16, the great Motortec Automechanika fair is held in Madrid and Cromauto, as usual, will be there to show you all the news.

Stop by Stand 4B25 and pay us a visit.

If you need invitations, contact us or our distributors.

We wait for you!!

As a result of the next Motortec Automechanika 2019 fair in Madrid, Cromauto presents several promotions of lots its innovative products such as the Diamond 4100 UHS varnish and the Filler 232 UHS Rapid. For each batch of products purchased during the days of the fair, exclusive Cromauto Coatings items will be added as a gift.

We launched our new range of Sprays, as the market was also demanding in this product line, the highest quality without losing sight of the price at which the workshop can obtain them.

With our study, we have selected a first initial range that will be increasing in the coming months and that will demonstrate how we are already confirming the workshops that have already tested them, that the quality and finish of them is what has long been They were suing.

Consult our distributors.
Marketing Cromauto
Cromauto Coatings, S.L.U
PALAU SOLITA I PLEGAMANS
08184 BARCELONA
TEL: +34 93 749 45 02

QUEDAN MENOS DE 10 DIAS PARA VERNOS EN MOTORTEC.

VISíTENOS EN EL PABELLÓN 4, STAND 4B25

Pónganse en contacto con nosotros o nuestros distribuidores si necesita invitaciones.

Os esperamos con novedades.

Estaremos encantados de recibirles un año más en nuestro stand 4B25 de MOTORTEC 2017, pónganse en contacto con nosotros o nuestros distribuidores si necesita invitaciones.

Os esperamos con novedades.

CROMAUTO quiere agradecer la fidelidad de sus clientes en estas próximas fechas navideñas, es por ello que sacamos al mercado unas promociones por Navidad.

Consulte condiciones con nuestros distribuidores, ya que serán vigentes hasta fin de existencias.

CROMAUTO ha presentado en las instalaciones de CESVIMAP sus diferentes líneas de productos, procesos de trabajo, documentación de color y para formación, etc. Félix Moreno (Director General), José Manuel Fernández (Director Técnico) y Eusebio (Técnico aplicador), fueron los profesionales de Cromauto que desarrollaron esta jornada.

La marca de pinturas Cromauto está ubicada en Barcelona, donde también está ubicado el departamento de colorimetría. La idea de CROMAUTO es poder aportar al taller toda la gama de productos necesarios para poder realizar reparaciones de pintura de calidad.

Tres son los acabados de color que hemos presentado:

• Color base bicapa al agua (CROMAQUA)
• Color base bicapa al disolvente (CROMACRYL)
• Color monocapa al disolvente (CROMACRYL)

CROMAUTO, empresa de pintura de carrocería exclusivamente después de afianzarse a través de sus 28 distribuidores actuales en todo el territorio nacional, presenta su extensa gama de productos en CENTRO ZARAGOZA.
En una jornada muy intensa, donde hemos podido presentar tanto la parte de la empresa más teórica donde se han visto todas y cada una de las ventajas de nuestros productos, junto con una parte práctica en cabina donde los profesionales de CENTRO ZARAGOZA han podido palpar y observar tanto el comportamiento como el rendimiento de cada una de las líneas que hemos presentado.
En primer lugar, destacamos desde CROMAUTO la presentación al CENTRO ZARAGOZA de nuestra pintura al agua CROMAQUA, de donde se han seleccionado varios colores para poder ver todas las argumentaciones teóricas pero ahora ya puestas en común dentro de la cabina, pudiendo demostrar la buena cubrición del producto, rápido secado y fiabilidad extrema en color.

Después hemos podido ver toda la gama de MASILLAS, masilla LIGHT 110, masilla MULTI 150, masilla FIB 170 y masilla ELAST 101, en todas ellas hemos demostrado que tenemos productos que están basados en nuestro contacto con el taller para cubrir sus necesidades.
En APAREJOS, hemos visto también toda nuestra gama, desde un aparejo monocomponente FILLER 210, hasta nuestros aparejos de secado rápido de nueva generación FILLER FAST 220, 225 y 229, acabando con nuestro aparejo de húmedo sobre húmedo FILLER 250 WW.
Por último hemos aprovechado para hacer unas aplicaciones con toda nuestra gama de BARNICES, siendo los dos más sorprendentes nuestro DIAMOND 4000 UHS, por su facilidad de aplicación y brillo, y nuestro DIAMOND 5OOO XTREME, barniz de secado al aire que ha demostrado ser ÚNICO en este tipo nuevos conceptos de barniz, en nuestro caso, hemos puesto en conocimiento de CENTRO ZARAGOZA como tenemos clientes que utilizan nuestro DIAMOND XTREME 5000 para coches completos, demostrando con ellos que hablamos de una tecnología que hasta ahora no se puede ver fuera de CROMAUTO.

Con todo ello, hemos hablado mucho sobre la importancia que tiene en este sector a día de hoy ver productos como los que hemos presentado con una imagen y calidad excelente con un precio muy competitivo para el taller que cada día ve como tiene también que buscar un precio pero siempre con una calidad y una fiabilidad que sólo una marca como CROMAUTO les ofrece.

Con el acuerdo que hemos alcanzado con el centro Juan de Herrera, podemos atender las necesidades que nos solicitan nuestros distribuidores en esas zonas.

Tenemos un calendario de formación para todo el año 2016, así que os animamos a conocer nuestros productos en dichas jornadas.

Con este, son ya dos los centros de formación de la firma CROMAUTO en España.

Desde CROMAUTO seguimos apostando y acercando la formación a nuestros usuarios.

Nuestros distribuidores saben y nosotros sabemos que hoy para poder impartir formación a los profesionales del taller, es vital acercarles la posibilidad de ver y probar nuestros productos a pocos kilómetros de sus lugares de trabajo, para facilitarlo, desde CROMAUTO COATINGS S.L.U. hemos diseñado un mapa de CENTROS DE FORMACIÓN repartidos por todo el territorio nacional, y hoy presentamos el primero de ellos para la zona LEVANTE.

Con la inestimable colaboración de nuestro distribuidor PINTURAS SANZ, hemos llegado a un acuerdo de colaboración donde utilizamos su centro de formación ubicado en CASTELLÓN para poder impartir cursos y demostraciones a todos nuestros usuarios de la zona del Levante.

Hasta ahora ya lo hemos utilizado sobre todo para demostraciones a nuevos distribuidores que se han incorporado a la red CROMAUTO, en la actualidad ya contamos con 24 distribuidores distribuidos por la mayor parte de la geografía española.

Centro Formacion 001 8598Centro Formacion 004 8609Centro Formacion 012 8629Centro Formacion 016 8636Centro Formacion 027 8645

Nuestros distribuidores del Levante empezarán en septiembre a trasladar a sus talleres un calendario de cursos y demostraciones para planificar hasta final de año las fechas en las que se impartirán los mismos.
Centro Formacion 022 8650Centro Formacion 033 8687

Con este nuevo CENTRO DE FORMACIÓN CROMAUTO, seguimos cumpliendo nuestro compromiso con la distribución y usuarios.
Así aprovechamos también desde aquí a todos aquellos que todavía no conocen CROMAUTO y quieran conocer nuestros productos, a contactar con nosotros a través de nuestra página web www.cromauto.com donde les informaremos de los distribuidores que atienden su zona e incluso les podremos preparar unas aplicaciones técnicas en sus talleres.

CROMAUTO sigue así creciendo junto a sus distribuidores a quienes agradecemos su esfuerzo y profesionalidad con la que están trabajando nuestros productos.

ROMAUTO es una marca que ya empieza a ser conocida en el sector de la carrocería en España.

Con más de 22 distribuidores actualmente a nivel nacional, este año nuestra intención es cubrir todo el territorio nacional para poder llegar a todos los talleres que quieren trabajar con CROMAUTO como ya lo están haciendo en aquellas zonas donde estamos trabajando codo con codo con nuestros distribuidores.

Aprovecharemos la feria MOTORTEC para acercarnos a los usuarios y exponer nuestra marca de pintura al agua CROMAQUA, donde podrán ver nuestra carta de color.

Acompañaremos nuestra pintura al agua CROMAQUA con toda nuestra gama de AUXILIARES, como nuestros barnices y catalizadores, aparejos y masillas que aportan al taller en conjunto un sistema de trabajo óptimo desde el punto de vista de calidad y precio.

Estaremos en el pabellón 6, stand 6B20. OS ESPERAMOS

Cromauto les invita a ver su vídeo de presentación en la pasada Feria Automechanika de Frankfurt

Feliz Navidad y próspero 2015

Cromauto se ha estrenado en Automechanika Frankfurt por todo lo alto para potenciar su imagen de marca en España y también darse a conocer internacionalmente.

Durante la feria ha presentado su producto estrella, los sistemas de pintura al agua Cromaqua, y el disolvente Cromacryl, exponiendo las dos máquinas que llevan este sistema para que los visitantes conozcan la disposición de las tintas.

También ha dado a conocer su programa de gestión de color Colorcrom, además de toda la gama de anexos y auxiliares de su catálogo, que incluye barnices, aparejos, masillas, disolventes y otros.

Además, coincidiendo con la feria, Cromauto ha reforzado su presencia en las redes sociales y ha mejorado su página web, ahora disponible en castellano, inglés y francés

FÉLIX MORENO, DIRECTOR GENERAL DE CROMAUTO, NOS PRESENTA SU EMPRESA

Cromauto da un paso más en su internacionalización al estrenarse este año en Automechanika Frankfurt, que se celebra del 16 al 20 de septiembre en la ciudad alemana.

Thank a lot for visiting us during the Automechanika Exhibition 2014.
It was a great pleasure to participate on this excelent exhibition and bring to the market our productos and Company.
we had presented our solvent system CROMACRYL, our waterborne system CROMAQUA, and our auxiliaries, and also everybody had saw our software COLORCROM.

www.cromauto.com
Cromauto Coatings, S.L.U
Pol.Ind. Can Boada Vell
C/ Santa Margarida de Boada Vell, Num 7-9 Nave 3
PALAU SOLITA I PLEGAMANS
08184 BARCELONA
TEL: +34 93 749 45 02
FAX: +34 93 864 60 76

CromautoFélix Moreno, Director General de Cromauto, es un gran conocedor con dilatada experiencia a nivel nacional e internacional, en el mundo de la carrocería y de la pintura; no en vano, desempeñó diversas funciones en Sagola, durante más de una década. Después de dejar la compañía vasca, y habiendo realizado un previo y potente estudio de mercado, decidió embarcarse en este ambicioso proyecto, creando CROMAUTO.

AUTOMECHANIKA FRANKFURT DEL 16 AL 20 DE SEPTIEMBRE Ven a vernos al Pabellón 11.1 Stand F17 Te Esperamos

La nueva página web de Cromauto ya está activa, con un contenido centrado en la información de la empresa y sus productos para el repintado. El objetivo es que distribuidores y talleres de chapa y pintura, ya sean clientes o potenciales usuarios de la marca, conozcan mejor la oferta de Cromauto.

“Hemos intentado plasmar en la página el espíritu de nuestra empresa, donde el principal valor son las personas y el color, queremos que sea un medio para acercarnos más a todos los agentes de la carrocería y por ello animamos a visitar nuestra web y conocer así un poco más a Cromauto”, explica Félix Moreno, su director general.

Origen: Infotaller

Cromauto es ya una realidad que responde a una apuesta ambiciosa y determinada: estar cerca del mercado, aportar valor, convertirse en una referencia por su especialización y capacidad en toda su cadena de valor, tanto a usuario final como a distribuidores.

Noticia original de Infotallertv